Welding Equipment & Accessories - Page 3 - Super Savings! Save up to 34%


Super Savings! Up to 34% off on Welding Equipment & Accessories at Defy Now, Page 3. Top brands include J.W. Harris, Jackson Safety, Hot Max, Lincoln Electric, Generic, ProCom, XtremepowerUS, & JamBer. Hurry! Limited time offers. Offers valid only while supplies last.



Ha Safety-Silv 56 1/16"4Oz
By J.W. Harris
In Stock
$68.26

mpn: 56F3184, ean: 0684032025028,

4.7 out of 5 stars with 11 reviews
56F3184, J.W. Harris Company, SAFETY-SILV 56 FLUX COATED.


Jackson Safety Contour #2 Marker Combo Adaptor
By Jackson Safety
In Stock
$45.34
$44.58
You Save: 2%

mpn: 14772, ean: 0024886073804,

4.6 out of 5 stars with 35 reviews
The Contour Marker consists of an X frame, calibrated protractor, and a triple-jointed marking arm adjustable to the line to be scribed.Designed for use with the standard contour markers, the Adaptor simplifies handling and increases layout capacity. Permits use of all four sides of the contour marker and allows marking on small diameter pipe, over nipples, old weld or on wrapped pipe. Also provides layouts with compound angles using a single setting, or any degree of takeoff on elbows and


Jackson Safety Welding Mag Plate Power 1.25
By Jackson Safety
In Stock
$22.52
$22.29
You Save: 1%

mpn: 16054, ean: 0024886285214,

4.1 out of 5 stars with 11 reviews
Kimberly-Clark Professional* offers a wide selection of Mag plates to fit the needs of most welders. While providing close vision without glasses, the 2x4 mag plates are also adaptable to all Auto-Darkening Filters.Select focal power by comparing prescription lenses.Magnifying plate. For W60 Truesight digital auto-darkening filter. Focal power 1.25. Available in clear color.


Hot Max 28109 4-Feet Safety Blow Gun with Rubber Tip
By Hot Max
In Stock
$26.89
$26.68

mpn: 28109, ean: 0816002007202,

4.0 out of 5 stars with 67 reviews
This is a 4-foot safety blow gun with rubber tip. The vented nozzle meets OSHA Program Directive #100-1 for reduction of air pressure below 30 PSI for cleaning purposes. It features a 1/4-inch female NPT inlet, maximum of 150 PSI, and 10.5 SCFM at 100 PSI. For compressed air only.Vented nozzle meets OSHA Program Directive #100-1 for reduction of air pressure below 30 PSI for cleaning purposes. 1/4-inch female NPT inlet. 150 PSI max. 10.5 SCFM at 100 PSI. For compressed air only.


Safety-Silv 56 1/16 x 18 Mini Sticks (5-Pack)
By Lincoln Electric
In Stock
$42.99

mpn: 56318LMPOP, ean: 0684032064461,

4.9 out of 5 stars with 11 reviews
For ferrous and nonferrous alloys. Often used to braze stainless steel. High silver content alloy; makes premium-quality brazes. Free flowing with unsurpassed capillary attraction and deep penetration with high ductility. Suitable for use in the food processing industry.Includes 5 sticks. 1/16'' x 18''. 56% Silver. 22% Copper. 17% Zinc.


Professional Flashback Arrestor Torch Mount 9/16"x18R.H Oxygen CGA022 & 9/16"x18L.H Acetylene CGA023 Safety Valve Temper Preventer (1pcs Oxygen Valve)
By Generic
In Stock
$12.00

mpn: USAValveTorchMount,

4.2 out of 5 stars with 117 reviews
Model Number: ProFlashbackArrestor_9/16''x18 Major Material: Brass Mount Type: Torch Mount Fuel Arrestor Connection: 9/16''-18 LH (CGA 023) Oxygen Arrestor Connection: 9/16''-18 RH (CGA 022) Fuel Work Flow: 2600LT/H Oxygen Work Flow: 7000LT/H Fuel Work Pressure: 1.5BAR (21.8psi) Oxygen Work Pressure: 20BAR (290.0psi) Dimension(single item): 76.3x19.3mm (3x0.76'') Weight: 253g(net) Prevents a flame from traveling past the flashback arrestor in the event of a flashback. This is our Top Quality


Jackson Safety Welding Helmet Parts Kit for HSL-100 & HaloX
By Jackson Safety
In Stock
$14.99
$12.90
You Save: 14%

mpn: 24550, ean: 0711382047803,

4.0 out of 5 stars with 117 reviews
Elongate the life of your helmet with replacement parts that ensure your hood is ANSI Z89.1 compliant.Replacement filter and safety plate kit for W10 HSL 100 passive welding helmet (sold separately). Comes with one 4.5'' x 5.25'' shade 10 filter plate to protect welder's eyes from radiant energy during welding. Comes with one 4.5'' x 5.25'' clear polycarbonate safety plate with gasket installed for protecting filter plate from weld spatter. Comes with one wire retainer to keep plates in place.


Jackson Safety Welding Ground Clamp GC-3 (14731), 1.625 Inch Jaw Opening, 1/0 and 2/0 Cable Connection Capacity, Forged Copper Alloy, 24/Case
By Jackson Safety
In Stock
$93.79
$93.76

mpn: 14731, ean: 0024886045443,

4.8 out of 5 stars with 63 reviews
Jackson Safety Brand GC-3 Ground Clamps feature large contact areas, high-clamping pressure and long-levered handles for easy jaw opening. The clamps have fully insulated pivots and springs. The cable jacket is held securely inside the conductor body with a cable bar for improved holding ability and longer cable life. Forged copper alloy ground clamps have higher conductivity, fewer residents and run at a cooler temperature at higher AMPs for better arc starting. The clamps feature serrated


Jackson Safety Model K Clear General Purpose Face Shield & Headgear Set - Ratchet Adjustment - 14382 [PRICE is per EACH]
By Jackson Safety
In Stock
$16.99
$15.04
You Save: 11%

mpn: 14382, ean: 0604844100034,

4.4 out of 5 stars with 106 reviews
The Jackson Safety face shield & headgear set is packaged 12 per case and comes in clear.Sale Unit: EACH. Brand: Jackson Safety. Series: Model K. Product Type: General Purpose Face Shield & Headgear Set. Headgear Type: Headgear.


Jackson Safety TrueSight II Welding External Safety Lens (30320), Protects Your ADF, Clear, 10 Units / Case
By Jackson Safety
In Stock
$36.91
$24.48
You Save: 34%

mpn: 30320, ean: 0036000303209,

4.6 out of 5 stars with 115 reviews
When you want to protect your Jackson Safety TrueSight II Digital ADF Welding Helmet, you need Jackson Safety TrueSight II External Safety Lens. The clear safety lens helps protect the auto-darkening lens by helping absorb sparks, smoke and impact. Make sure you have an internal and external safety lens to help extend the life of your ADF. You can trust Jackson Safety to provide welding tools to live up to your standards.10 Jackson Safety TrueSight II External Safety Lens / Case. Clear external


ProCom NVDWA1 Safety Pilot Manual Valve Kit And Lp Conversion Kit
By ProCom
In Stock
$30.69

mpn: NVDWA1, ean: 0800084003009,

4.2 out of 5 stars with 34 reviews
The safety pilot manual valve kit model# nvdwa1 and liquid propane gas conversion kit. This kit is required when using liquid propane gas with the ProCom heating and Duluth forge vented gas log sets and glass burners. This kit can be used with either natural gas or liquid propane gas installations. This kit will establish a standing pilot and also includes a push button igniter so you can light the vented gas log set without using a match. For use with vented gas log sets. This kit is needed


XtremepowerUS HD Welding Cart Universal MIG MAG ARC TIG Machine Welders Home Garage Shop + Safety Chain
By XtremepowerUS
In Stock
$49.95

mpn: X5118, ean: 0608939652828,

4.3 out of 5 stars with 68 reviews
Dimensions • Top shelf: 17-1/2'' x 11'' • Middle shelf: 15'' x 11'' • Bottom front shelf: 17'' x 11-1/2'' • Bottom rear shelf: 10'' x 11-1/2''Heavy Duty Casters 2pc 3'' Swivel & 2pc 7-1/4'' Fixed. 3 Shelves For Easy Access to Supplies. Max Weight: 100lb. 2pcs Heavy Duty 3'' Swivel Caster Front Wheels. 2pcs Heavy Duty 7-1/4'' Fixed Caster Rear Wheels.


JamBer Chef Blow Torch Culinary Butane Torch Refillable Cooking Torch Kitchen Handheld Torch with Safety Lock&Adjustable Flame Lighter for Crème Brulee,Camping,Searing,Soldering,Grey,Gas Not Included
By JamBer
In Stock
$17.97

ean: 0710280303011,

4.2 out of 5 stars with 67 reviews
Looking for A Gift for Your Friends or Family? Give them the best kitchen gadgets!JamBer Culinary Butane Chef Torch ---The Amazing Refillable Cooking Kitchen Blow Torch With Safety Lock & Adjustable Flame ever! How to use: 1.Gas-refilled: please insert the Butane Gas Refill bottle vertically to the blow torch bottom as shows in picture , wait for 6 secs once and then pull out, 3 ~4 times operation will fully refill blow torch, wait for minutes then blow the fire. 2.Light up : First and



Viewing Page 3 of 3

View more products in Welding Equipment.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - defynow.org. All Rights Reserved.